Rear Seat Removal
Republished from http://www.bullittarchive.com/
Download in PDF(right click
save as)
Easiest way to remove the back seat is take the seat belt buckle
and insert it between the bottom of the seat and the carpeted
floor. Try to hold the buckle parallel to the ground and NOT at an
angle. Insert it about 8 inches from the door seal and then slide
it towards the the center of the seat.
You will hit the side of the catch mechanism. Pull the buckle
back slightly and move it about an inch further. Push the buckle in
and the will release the catch.
Same procedure for the other side of the seat. You can now lift
the back seat up.